eFoil Solutions V2 Toroidal Propeller for Lift eFoil

$489.00

eFoil Solutions V2 Toroidal Propeller for Lift eFoil

$489.00

eFoil Solutions’ toroidal propeller for Lift eFoils, in the new 2026 quick-release (QR) version: swap props with a snap. Closed-loop blades that eFoil Solutions says give over 15% better efficiency, quicker acceleration and a quieter ride than the stock Lift prop. Red.

Description

The eFoil Solutions V2-QR Toroidal Propeller is an aftermarket propeller for Lift eFoils with the LCS cone interface. Instead of separate blade tips, a toroidal prop has closed-loop blades. eFoil Solutions says this reduces turbulence and noise and improves thrust efficiency, so you foil at lower RPM and get more ride time from each battery. This is the 2026 quick-release (QR) version in red, which lets you swap props with a snap instead of a screw and pin.

What eFoil Solutions says it does

Efficiency Over 15% better than the stock Lift propeller
Acceleration Faster to foiling speed, with more thrust at lower RPM
Noise Significantly quieter than the stock prop
Handling Smooth and stable, with good maneuverability; improved for all riders and speeds over the V1

The chart in the gallery is eFoil Solutions’ own test, comparing amp draw against speed for the toroidal and stock Lift props on a Lift Cruiser V2.

Compatibility

Fits Lift eFoil propulsion systems with the LCS cone interface, Lift eFoil versions 1 through 5
Not for Lift X (eFoil Solutions says the prop isn’t optimized for it)
Shroud Compatible with the Lift propeller shroud; eFoil Solutions recommends its shroud extender, or its tail cone for shroud-free riding (both sold separately)
Fitting Quick release (QR)
Colour Red

Before you buy

eFoil Solutions notes that, like any propeller, the V2 is tuned for an optimal performance range. Riders over 220 lb (100 kg) using it with a smaller Lift Pro board may get less than optimal performance. Outside that combination, eFoil Solutions expects most riders to see a clear improvement. Read eFoil Solutions’ safety instructions for its propellers before riding.

FAQ

Will the eFoil Solutions V2-QR Toroidal Propeller fit my Lift eFoil?

It fits Lift eFoils versions 1 through 5 as long as you are using the LCS cone interface. It isn’t optimized for the Lift X. If you’re not sure which system you have, call the shop.

What’s the difference between the V2 and the V2-QR?

Both use the same V2 toroidal blade design. The standard V2 attaches with a screw and pin; the V2-QR, new for 2026, has eFoil Solutions’ own quick-release fitting so you can swap props with a snap.

Can I use it with the Lift prop guard?

eFoil Solutions says it’s compatible with the Lift propeller shroud and recommends adding its shroud extender.

Is a toroidal prop quieter?

eFoil Solutions says the closed-loop blades significantly reduce noise compared with the stock Lift propeller.

See more from eFoil Solutions.

Questions on fit or setup? Call the shop.

Goes well with

Gear riders usually add, in stock now.

On Sale

new products

featured products

eFoil Solutions V2 Toroidal Propeller for Lift eFoil
$489.00