$4,999.00 – $6,999.00Price range: $4,999.00 through $6,999.00
RIIFT’s complete foil assist in one hard case: a 2P, 3P or 4P Power Module that sits flush inside a RIIFT-enabled board, a 49mm propulsion pod that straps to your mast, and a remote. Nothing on the deck, nothing under the mast plate. Pre-order: the first PowerPacks are expected to arrive around January 15, 2027.
Pre-order. RIIFT goes on sale in the US on November 20, 2026, and the first PowerPacks are expected to arrive around January 15, 2027. Order now to reserve one from the first delivery.
RIIFT is a foil assist built around one idea: a powered board should ride like an unpowered one. Instead of bolting a battery to the deck or sandwiching it under the mast plate, the RIIFT Power Module clicks into RIIFT Tracks that are built flush into the board, directly above the foil. The 49mm propulsion pod straps to the mast you already own. RIIFT says setup takes no tools: strap the pod on, click the module in, switch on the remote and ride.
All three sizes fit the large RIIFT Tracks and deliver the same thrust; they differ in capacity, weight and runtime. RIIFT’s own figures (80 kg advanced rider, flat water, 800 cm² high-aspect foil, single run):
| Module | Capacity | Module weight | Continuous riding | Charge to 80% | RIIFT’s guidance |
|---|---|---|---|---|---|
| 2P | 519 Wh | 3.5 kg / 7.7 lb | about 36 min | about 58 min | The lightest option, for lighter riders and experienced prone and downwind foilers who want the purest feel. The only module that fits thin 2P boards. |
| 3P | 778 Wh | 4.8 kg / 10.5 lb | about 54 min | about 86 min | RIIFT’s go-to: the all-round balance of capacity and weight. |
| 4P | 1037 Wh | 5.9 kg / 13.0 lb | about 72 min | about 115 min | Maximum endurance for tow-foil alternatives, long flat-water sessions, schools, clubs and heavier riders. Still pumpable thanks to its position in the board. |
Runtime and charge time vary with rider weight, foil, conditions and throttle use.
The PowerPack does not include a board. See below.
RIIFT only works in a board built with RIIFT Tracks; it does not retrofit to a standard mast track. For launch we are taking pre-orders on the Appletree Zapple S RIIFT, which comes in a thin 2P-only version and a thicker version that takes the 2P, 3P or 4P module. Sunova RIIFT boards follow, and a growing list of shapers builds custom RIIFT boards on the tracks.
| 2P | 3P | 4P | |
|---|---|---|---|
| Capacity | 519 Wh / 12.0 Ah | 778 Wh / 18.0 Ah | 1037 Wh / 24.0 Ah |
| Module weight | 3.5 kg | 4.8 kg | 5.9 kg |
| Installed weight (module + pod) | 4.5 kg | 5.8 kg | 6.9 kg |
| Nominal / charge voltage | 43.2 V / 50.4 V, 10 A charge current | ||
| Propulsion unit | 49mm pod, 2500 W motor, 1.1 kg, about 30 kg static thrust | ||
No. RIIFT needs tracks built into the board. You can use any board from a RIIFT shaper, or have a custom board built on RIIFT Tracks.
RIIFT recommends the 3P for most riders. Go 2P if you are light, already proficient, or want a thin 2P-only board; go 4P for schools, heavier riders or the longest sessions. Call us and we will talk it through.
There is no separate battery to swap. The RIIFT Power Module is one sealed piece with the battery and the ECU combined, and it is the whole thing that clicks in and out of the tracks. In practice, with the efficiency and the feel of the system, most riders do not find they need a second one. If you do want more time on the water, a spare Power Module is sold on its own in all three sizes and swaps into the same tracks.
This is a pre-order. The first US delivery is expected around January 15, 2027.
Questions on sizing or setup? Call the shop.
Gear riders usually add, in stock now.








