Compatible products: 2010 Compstick 2011 Compstick 2012 Compstick 2013 Compstick 2014 Compstick 2015 Compstick 2016 Compstick w/ Guardian 2017 Compstick w/ Guardian 2018 Compstick w/ Guardian 2019 Compstick w/ Guardian

How to Repair the Mainline on a Slingshot Control Bar

Does your Mainline look like this? Here is how to replace it.

Removal

1. Wrap your lines around something like a chair to make sure lines do not tangle. 2. Undo the the quick release and release the small bungee inside. This will allow you to pull out the mainline and replace. 3. Cut out the old frayed mainline and unscrew the plastic depower handle and spherical stopper ball. Be sure not to loose any screws during the process.

Install

1. Once the mainline is free and all you are left with is the CSS saftey bungee line, you can take your replacement mainline and begin by seating it into the screw plate beneath the quick release. 2. Thread the line through the quick release box, then the control bar, then the oblong plastic threader, then the spherical stopper ball. 3. Now run the line past the swivel and back down to the quick release. When threading the mainline through any small opening, use a line of smaller diameter to thread like shown.     

Finish

Finally, re-install the depower handle and replace the quick release bungee. Now snap in place! You’re done!